bose stereo line level install

Home / the12volt's Install Bay / Car Audio / bose stereo line level install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

silvagtp00

Member - Posts: 5

Joined: November 07, 2004

Location: United States

Posted: November 09, 2004 at 7:59 PM / IP Logged

I am looking in installing an line level converter into a 2000 pontiac grand prix . i wanted to know the best place to tap into the speaker outputs because i know the bose amp filters response to each speaker differently inturn not providing a full range . ANY IDEAS

Back to Top

jstruckman

Copper - Posts: 465

Joined: May 03, 2004

Posted: November 09, 2004 at 9:21 PM / IP Logged

You need to use an active LOC that can handle the low level differential outputs of the receiver, there are several companies that make these, i am please with the Soundgate LOCB.2. It will give you 2.5 volts RMS out no matter the input voltage, just get it as close to the back of the radio as possible to decrease the chance of noise entering the system

Jazzy

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bose stereo line level install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.