the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Installer Schools


Post ReplyPost New Topic
< Prev Topic Next Topic >
kamber 
Member - Posts: 10
Member spacespace
Joined: November 09, 2004
Location: United States
Posted: November 11, 2004 at 10:22 PM / IP Logged  

I am very interested in going to an installer school (like Syntech) after i get out of high school, and hope to become a professional installer. My question is, for all of you installation professionals, which school would be the best one to go to? Since i dont know what its like to be a professional installer, i dont really know what to look for from a school of this nature. Also, if any of you dont mind, i would like to know about how much money i could expect to earn yearly (im not in it for the money, i absolutely love car audio, i would just like to know) Anyone with any knowledge about any of these topics would be greatly appreciated.

Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: November 11, 2004 at 10:47 PM / IP Logged  
As far as schools go Mobile Dynamics is one of the top schools I know of. I think there is one in Pheniox and one in Toronto. As far as money goes it depends on who you work for. I for example work for a big box and only make about 24,000 a year where as I have friends who are at the same skill level as me but work for smaller companies and they make double what I do. It all depends on if you get set up on an hourly wage or a commision structure. On commision if the shop you work at is busy then you will make pretty good money but when there buisness is slow then your checks shrink substantially. When you get paid hourly there is less preasure on you and you always no how much you will make but it is usually quite a bit less then a commision worker at a busy time. BTW, reviews are almost always bought and I wouldnt throw to much wieght behind what magazines say about subwoofers. Always go by your ear
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer