dvc 12

Home / the12volt's Install Bay / Car Audio / dvc 12 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lawrenq

Member - Posts: 8

Joined: September 21, 2004

Posted: November 12, 2004 at 1:41 PM / IP Logged

i have two mb quart 4 ohm dvc 12s on a 700 watt 2 channel autotek amp what is the best way to wire them.

Back to Top

fuseblower

Silver - Posts: 403

Joined: June 25, 2003

Location: United States

Posted: November 12, 2004 at 1:45 PM / IP Logged

I all depends on your amp and what you are trying to achieve. You can wire them down to two ohms per channel or you can bridge the two sub to make a 4ohm mono load.

But that's all dependant on your amp. I would wire my amp achieve the greatest SQ with the most power. Just see which wiring method has less distortion and go with it.

Back to Top

lawrenq

Member - Posts: 8

Joined: September 21, 2004

Posted: November 12, 2004 at 1:48 PM / IP Logged

the amp that i have is the autotek sx-2300

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 12, 2004 at 1:56 PM / IP Logged

That's a stereo amp that is bridgable into a 4-ohm load. Connect your subs in series-parallel.

dvc 12 -- posted image.

Support the12volt.com

Back to Top

lawrenq

Member - Posts: 8

Joined: September 21, 2004

Posted: November 12, 2004 at 5:43 PM / IP Logged

Thanks that works a whole let better than how it was.

Back to Top

astro88

Copper - Posts: 195

Joined: December 01, 2003

Location: Canada

Posted: November 12, 2004 at 7:30 PM / IP Logged

How was it?,just curious

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dvc 12

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.