Booming won't stop

Home / the12volt's Install Bay / Car Audio / Booming won't stop (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

offroadbum

Member - Posts: 14

Joined: November 27, 2003

Location: United States

Posted: November 22, 2004 at 4:23 PM / IP Logged

I just installed an amp and a sub box.

The subs just pluse BOOM BOOM BOOM.It doesn`t matter if the head unit is up or down.

I`ve rewired twice,changed amps3 times,move the ground alround the truck,but it doesnt change.

Anybody ever heard of this before? I`ve do this same install a 100 times and never had anything close to this happen.

Pioneer p440

comp vr 12`s

orion 8002

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: November 22, 2004 at 4:30 PM / IP Logged

check your speaker wiring and power and ground lines..make sure rca's are connected correctly to the deck and to the amp, that they are both in the proper in and out spots

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

offroadbum

Member - Posts: 14

Joined: November 27, 2003

Location: United States

Posted: November 22, 2004 at 4:33 PM / IP Logged

I`ve gone through the wiring twice already.

Something is giving it a signal,but what??

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: November 22, 2004 at 4:34 PM / IP Logged

Loose or defective RCA is my best guess

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

offroadbum

Member - Posts: 14

Joined: November 27, 2003

Location: United States

Posted: November 22, 2004 at 4:37 PM / IP Logged

I`ve changed the rca`s 3 time and no help

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: November 22, 2004 at 4:40 PM / IP Logged

Does it still do it if you unplug the RCA's from the amp

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

offroadbum

Member - Posts: 14

Joined: November 27, 2003

Location: United States

Posted: November 22, 2004 at 4:44 PM / IP Logged

nopeno output at all

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: November 22, 2004 at 4:48 PM / IP Logged

What the hell does nopeno mean, If that means no than it means that the problem lies in either the RCA inputs on the amp, the RCA outputs on the deck or the cables. If the deck has multiple out puts try hooking up to another set, Is this using a factory deck or after market?

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

offroadbum

Member - Posts: 14

Joined: November 27, 2003

Location: United States

Posted: November 22, 2004 at 4:52 PM / IP Logged

Sorry for the typo!! nope no output

it is a pioneer p440

and yes i have changed at the deck

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: November 22, 2004 at 4:54 PM / IP Logged

I think you need to take your amp and get it bench tested at a local shop

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.