crossover with stock deck

Home / the12volt's Install Bay / Car Audio / crossover with stock deck (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

H2prix

Member - Posts: 27

Joined: December 24, 2004

Location: United States

Posted: December 27, 2004 at 7:10 PM / IP Logged

I was wondering if it was possible to have an awesome sound, using a LOC and a high end crossover..? Don't get me wrong my setup sounds good for me right now, but its missing some of the mids from my heavy bass hits, it just doesnt sound right..Could you run a line level out converter, straight to a crossover, and have the ability to exact the crossover points and all. I have a 00 grandprix gtp with a bose system, that has a external ampilifer. Would this ampilifer mess with that crossover and ruin things, or would it work??

Thanks.Brett

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 27, 2004 at 8:33 PM / IP Logged

With the Bose setup, the factory crossovers are inside the amps themselves. You're better off just replacing the whole system.

My ex once told me I have a perfect face for radio.

Back to Top

H2prix

Member - Posts: 27

Joined: December 24, 2004

Location: United States

Posted: December 27, 2004 at 9:00 PM / IP Logged

No other way out huh?

Back to Top

H2prix

Member - Posts: 27

Joined: December 24, 2004

Location: United States

Posted: December 27, 2004 at 11:44 PM / IP Logged

The bose setup i have does sound "decent", but does not compare to any aftermarket component setups im sure..I would like to know some way possible to get around this situation without replacing the whole entire bose system.

Help out please

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: December 28, 2004 at 12:47 AM / IP Logged

Check into these PAC products to allow interfacing a separate amplifier to run additional speakers. You could work on adding the missing sounds instead of trying to modify the current bose system.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

crossover with stock deck

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.