connecting rca converter to factory head

Home / the12volt's Install Bay / Car Audio / connecting rca converter to factory head (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

97bmwm3

Member - Posts: 2

Joined: December 30, 2004

Posted: December 30, 2004 at 12:36 PM / IP Logged

i dont know which cables from the input leads to which cables to the head unit leads the converter leads are left positive white--------- left negative WHITE/ black-------right positive gray--------right negative gray/black

and i was wondering if u can tell me how to install the remote lead to a switch and to the ignition source and do i need a fuse for this

Back to Top

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: December 30, 2004 at 12:41 PM / IP Logged

Check the info database and see if your car's listed.

https://www.the12volt.com/installbay/forum_topics.asp?fid=7

Then connect the LOC leads to the appropriat rear speaker wires and your done.

As for the remote, run a wire from the fusebox to the amp, connect the wire to whatever fuse is used for the radio.

Paul

Back to Top

97bmwm3

Member - Posts: 2

Joined: December 30, 2004

Posted: December 30, 2004 at 1:07 PM / IP Logged

Francious70 wrote:

Check the info database and see if your car's listed.

https://www.the12volt.com/installbay/forum_topics.asp?fid=7

Then connect the LOC leads to the appropriat rear speaker wires and your done.

As for the remote, run a wire from the fusebox to the amp, connect the wire to whatever fuse is used for the radio.

Paul

Back to Top

dedlyjedly

Copper - Posts: 94

Joined: November 17, 2004

Location: United States

Posted: December 30, 2004 at 2:46 PM / IP Logged

FRANCIOUS HAS YOU COVERED-

MAKE SURE YOU CONNECT TO THE "HOT SIDE" 9SHOWS POWER WITH OR WITHOUR THE FUSE IN PLACE) OF THE FUSE & REMEMBER TO USE A FUSE INLINE ON ANY POWER WIRES YOU RUN!

MECP certified, 5yrs experience, you probably otta listen bitch!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

connecting rca converter to factory head

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.