the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amplifier bypass 1994 /1995 pathfinder


Post ReplyPost New Topic
< Prev Topic Next Topic >
labtec 
Member - Posts: 3
Member spacespace
Joined: January 07, 2005
Location: Canada
Posted: January 08, 2005 at 12:00 AM / IP Logged  

Trying to install a pioneer mp3/cd player into a 1995 nissan pathfinder.

it is early 1995 so may be wired as a 1994 

Factory deck is a Clarion model no. pn-9661h, part no. 286-7756-13

Speaker amp in rear passenger panel is model no. en-966n part no. 286-7062-58

And model no. en-998n part no. 286-7062-57

 

I got the deck wired up and everything it lights up but there is no sound.

I am wondering how to  bypass the speaker amps.

Is there any wiring diagrams for those amps

Any help would be appreciated.

labtec 
Member - Posts: 3
Member spacespace
Joined: January 07, 2005
Location: Canada
Posted: January 08, 2005 at 12:13 AM / IP Logged  

Trying to install a pioneer mp3/cd player into a 1995 nissan pathfinder. It is early 1995 so it may be wired as a 1994.

Factory deck is a Clarion model no. pn-9661h, part no 286-7756-13.

Speaker amp in rear passenger panel is model no. en-966n part no. 286-7062-58 and model no en-998n part no 286-7062-57

I got the deck wired up and the panel works ok but there is no sound.

I am wondering how to bypass the speaker amps.

is there any wiring diagrams for those amps

Any help would be appreciated./

Not sure why all the other crap got mixed up in the previous post. Might have happened when I pasted it in.

geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: January 08, 2005 at 10:13 PM / IP Logged  

Have a look here to match up which plugs you have behing the deck, and hook it up accordingly.

http://www.installdr.com/Harnesses/Nissan-Wiring.pdf

My ex once told me I have a perfect face for radio.
labtec 
Member - Posts: 3
Member spacespace
Joined: January 07, 2005
Location: Canada
Posted: January 09, 2005 at 1:11 AM / IP Logged  

Thanks for the info. I got it figured out. had to use a battery to trace the wires back to the rear passenger side panel (where the two amps were located. Then I used a battery to locate the wires for the speakers. The front tweeters were 2.4 ohm and the larger speaker was 3.4 so I wired them in series. The rear speakers were already hooked together & they showed as 4 ohms each side combined. (didn't look to see how it was wired)

After all that. & doing it out in the cold. Works great.

Great forum here. I found a lot of useful info. Thanks.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer