Kenwood KDC-MP625 no sound from CD or CH

Home / the12volt's Install Bay / Car Audio / Kenwood KDC-MP625 no sound from CD or CH (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

teal9d4

Member - Posts: 5

Joined: December 28, 2004

Location: United States

Posted: January 09, 2005 at 6:00 PM / IP Logged

I'm wondering if anyone out their could help me out with this one? I just installed a brand new KENWOOD KDC-MP625 and I only have volume on the TUNER source. The volume doesn't come thru the speakers when a CD is playing or a Disc Changer is? Can anyone help me figure this out or is the unit d.o.a, please help me!!!

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 09, 2005 at 6:05 PM / IP Logged

Did you hook up the remote turn on or the antenna wire as the remote turn on wire? What kind of car?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

teal9d4

Member - Posts: 5

Joined: December 28, 2004

Location: United States

Posted: January 09, 2005 at 6:41 PM / IP Logged

Yes it's hooked up, Acura 97' CL the tuner works fine but when I switch to CD or Changer the volume goes out. It play the counter counts but no volume? Is there a setting I don't have right not sure?...Thank you though

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: January 09, 2005 at 7:23 PM / IP Logged

make sure you used the blue/white wire instead of the blue wire from the head unit so the factory amp stays on all the time. the blue wire is for power ant. and shows 12+ only when the tuner is on so the antenna goes down when you play cds.

teal9d4

Member - Posts: 5

Joined: December 28, 2004

Location: United States

Posted: January 09, 2005 at 7:33 PM / IP Logged

Yes, thank you that was the problem. I can't believe I made such a stupid mistake, I wasn't thinking about the power antenna wire! And thank you too "auex" I figured out right where you were going with your reply, you two were a successful help with this issue!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood KDC-MP625 no sound from CD or CH

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.