Need pin outs for Explorer subwoofer out

I need to know pin outs for out put on the 2002 explorer radio and for navigator 20043 radio

  Any help will be appreciated.

victorbmw

if the rear of the radio has a small 8 or 8 pin plug then I remember RED / black being turn on, and the other two signal wires, you do not need to hookup the uninsulated wire.

If all else fails just remove rear quarter panel to check for wirecolors to factory amp.

Also remembver to use atleast a 570ohm resistor on your turn on lead, to avoid turn on pop.

Hope this helps

Bryan