the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Custom Box: Treo TS.10 woofers


Post ReplyPost New Topic
< Prev Topic Next Topic >
uthinkuknoaudio 
Silver - Posts: 760
Silver spacespace
Joined: October 08, 2004
Location: United States
Posted: January 26, 2005 at 8:07 PM / IP Logged  
Well, here is the deal. I was rummaging through my shop when i came across two of these TS10.8 woofers from Treo, new in the box of course. I wanted to know how i should build this box for them.
Here are the T/S Parameters:
 
Mounting Hole: 9-3/16"
Mounthing Depth: 4-3/4"
Outside Diameter: 10-9/16"
RMS Power: 150W
Re DC Impedence: 8.0 ohm
Sensitivity: 85.26
V.C. Diameter 2.0"
Motor Strucutre: 114 Oz.
Le 7.98 mH
Vas: 2.26cuFt
Qts: .641
Qes: .715
Qms: 6.166
MMS: 100.66g
BL: 14.32 TM
Sd: .418 SQFt
X-MAX: .865"
Fs: 29.00 Hz
 
I hope all that helps. Someone design me a box. Make it simple enough for me to understand lol, i'm just the boss and my box guy is on vacation so i'm screwed for 2 weeks. Might as well keep busy. Just give me length x width x height.
"I don't play games. I play Nakamichi and that for real yo" - Probably some japanese kid said this in the early 80's trying to sell stereo out of his trunk lol.
uthinkuknoaudio 
Silver - Posts: 760
Silver spacespace
Joined: October 08, 2004
Location: United States
Posted: January 26, 2005 at 9:26 PM / IP Logged  
I assume everyone is lost in the dark or not paying attention... Anyone want a flashlight?
 
- Someone said they needed T/S parameters to build a box, so let a rip.
 
Tony
"I don't play games. I play Nakamichi and that for real yo" - Probably some japanese kid said this in the early 80's trying to sell stereo out of his trunk lol.
customsuburb 
Gold - Posts: 1,813
Gold spacespace
Joined: January 17, 2004
Location: United States
Posted: January 26, 2005 at 10:06 PM / IP Logged  

It's not that hard to design or build one. Just download WinISD and play around with different box types and sizes. You probobly would want to put them in a ported box because of their low sensitivity.

WinISD www.linearteam.dk


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer