Alpine CDA-7893 w/0 amp?

Home / the12volt's Install Bay / Car Audio / Alpine CDA-7893 w/0 amp? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

goshred025

Member - Posts: 7

Joined: January 19, 2005

Posted: January 28, 2005 at 2:56 AM / IP Logged

This deck is currently hooked up to an amp. I was search to the older post and i havent understood what i must do to run the deck with out an amp. So could some one make a simple step by step on how to change it over? Would i be able to use the fuse and wire from that runs from the battery to the head unit? what wire would i connect it to. Or would i just need a new wire harness?

blg748

Copper - Posts: 194

Joined: October 29, 2003

Posted: January 28, 2005 at 7:10 AM / IP Logged

read the manual . go to alpines site if you want to and download your manual. if you know how ho to get to the MENU setting then the SETUP and if its like my deck in the setup money will have options like sub on off and and then something called PIC its ON for deck amp to be on and put it to OFF if you want to power everythign via extrernal amps.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine CDA-7893 w/0 amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.