the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power inverter on/off


Post ReplyPost New Topic
< Prev Topic Next Topic >
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: March 01, 2005 at 12:48 AM / IP Logged  
Does anyone have an idea how i can make my power inverter come on/of like an amp does. I don't want to have to remember to cut it off every time i get out the car.
Asmodeus 
Silver - Posts: 393
Silver spacespace
Joined: September 02, 2004
Location: United States
Posted: March 01, 2005 at 1:05 AM / IP Logged  

get a SPDT relay....

Run a fused wire from your battery to where ever your inverter is

ON the relay....PIN CONFIG....

Pin 87 12V+ input from batt...

PIN 86 Remote turn on (Any key-on key-off source)

PIN 85 Ground

PIN 30 12V switched output to inverter

Just make the connections on the relay and ground your inverter...You will need to either cut the cigarette plug off the inverter or buy a cig plug and attach it to the relay and then plug into that...

That should do it...If I am wrong plz post....I am very tired and going to bed...

power inverter on/off -- posted image.
Making the World A Louder Place
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: March 01, 2005 at 1:22 AM / IP Logged  
that's what i was thinking but yeah it is late and my brain is dead
thanx
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 01, 2005 at 9:06 PM / IP Logged  
I did one of these in a new Dodge Magnum, but since it was rated at 1000 watts, I used a 200 amp battery isolator.
My ex once told me I have a perfect face for radio.
Reeceddogg 
Copper - Posts: 329
Copper spacespace
Joined: September 23, 2002
Location: United States
Posted: March 02, 2005 at 11:00 PM / IP Logged  
My power inverter is rated 150/450. and i'm only using it for my playstation. so i was thinking 12ga for my wire

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer