LED's in the port

Home / the12volt's Install Bay / Car Audio / LED's in the port (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lrc313

Member - Posts: 6

Joined: February 24, 2005

Posted: March 07, 2005 at 2:27 PM / IP Logged

i really want to put evil eyes in the [slot]port of box.

im building a new one so i can get tools to any part of the box but i dont want there to be anything sticking out that will cause noise.

any ideas would be helpfull

skoldspuppy

Silver - Posts: 342

Joined: July 11, 2004

Location: United States

Posted: March 07, 2005 at 3:18 PM / IP Logged

Ive seen this done a few times at car shows down here in Miami, the leds are so small I dont think you will notice any port noise at all from it, the bulbs would stick out what 2-4MM at most?

You could look into some fiber optics you can get DC 12 volt strands that are as thin as a human hair

good luck with it Id love to see some pics of it

2004 Honda Civic Ex 4Dr

Kenwood DDX-7015/W Nav

4 Fosgate T152C

Hifonics Brutus BX1500D

RE XXX 12 in a 4 Cube Snail Shell

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED's in the port

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.