2 amps

Home / the12volt's Install Bay / Car Audio / 2 amps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Grat_master

Member - Posts: 19

Joined: May 09, 2004

Location: Canada

Posted: March 09, 2005 at 2:42 AM / IP Logged

Hey,

For now, I have 2 12" cerwn-vega (400 watts rms each) with a Rockford Fosgate type RF x5 (800 watts rms) ... I also have 2 6.5" spl speakers in front and the same thing in rear ... I want to add an amplifier to those speakers ... Is this going to use too much power ? What do I need ?

Anyway, if you can help me with all this it will be great ! If it's a repost, than just ignore this topic, and I'll search for some other ones ...

thx

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: March 09, 2005 at 7:14 AM / IP Logged

try matching the 6.5s with the spl high level 300 or 400. they are strictly for mids, there is no lowpass.

Back to Top

Grat_master

Member - Posts: 19

Joined: May 09, 2004

Location: Canada

Posted: March 16, 2005 at 6:13 PM / IP Logged

another little question ...

how do I connect my rca, if my hu only got 2 rca output ? one for the front speakers, one for the rear speakers OR subwoofer, when I activate my subwoofer control ... do I need an external crossover ?

thx

Back to Top

Chad7n7

Silver - Posts: 408

Joined: March 09, 2004

Location: United States

Posted: March 16, 2005 at 6:17 PM / IP Logged

If you are using a single two channel amplifier to power fronts and rears, then all you need is one set of preouts. If you use a four channel,you can use a set of splitters to split the jacks from one set to two sets, any local shop should carry them.

If the amplifier you choose to use has a built in crossover, then there is no need for an external.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.