mono amps

Home / the12volt's Install Bay / Car Audio / mono amps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mini14

Copper - Posts: 120

Joined: December 31, 2004

Location: United States

Posted: March 22, 2005 at 11:21 PM / IP Logged

When a mono amp has two sets of outputs, for example my xtant a3001 has two sets of outputs, but is mono. It puts out 300watts rms @ 2 ohms. If i were to put a speaker on both outputs would they both receive 300 or 150 watts?

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: March 22, 2005 at 11:27 PM / IP Logged

If the amp is seeing 4 ohms from each speaker then each will get 150 watts. I think.

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Back to Top

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: March 23, 2005 at 11:01 AM / IP Logged

300 RMS x 1 @ 2 ohms.

150 RMS x 2 @ 2 ohms.

75 RMS x 2 @ 4 ohms.

Paul

Back to Top

crazyinkc

Member - Posts: 6

Joined: September 24, 2003

Location: United States

Posted: March 23, 2005 at 4:38 PM / IP Logged

I have a Xtant 3001a also. It has 2 outputs so you can hook up 2 4ohm subs to the amp rather than wiring the 2 bubs together then to the amp. Both outputs originate from the same point and if you ohm out the outputs, you will see they are 0 ohms side to side.

Back to Top

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: March 24, 2005 at 9:04 AM / IP Logged

your mono amp have 2 outputs but are one ch. you can use 1 or both just easeir to use both. they are both the same ch

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mono amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.