amp install 2004 Chevrolet Malibu maxx

Home / the12volt's Install Bay / Car Audio / amp install 2004 Chevrolet Malibu maxx (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

p71cruiser

Member - Posts: 7

Joined: January 05, 2005

Posted: April 09, 2005 at 12:00 AM / IP Logged

I'm installing an amp and subs to the factory radio using a line output converter. Could anyone Give me the wire colors plus and minus to the rear speakers at the b pilar? ( where the seatbelt is for the front seats?) And Also where would you get threw the firewall at? If i really need to drill a hole would the passanger side be better? and how can I get threw the double firewall? This has to be the hardest car I have done an amp on no room to work on the firewall.

Thanks a lot for any info you can give

Back to Top

p71cruiser

Member - Posts: 7

Joined: January 05, 2005

Posted: April 09, 2005 at 12:54 AM / IP Logged

Oh yea ! I need an ACC wire for amp turn-on hopefully without going the ign switch.that seems to be a pain to get to.

thx again

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp install 2004 Chevrolet Malibu maxx

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.