Factory Amp

Home / the12volt's Install Bay / Car Audio / Factory Amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Izzum88

Copper - Posts: 51

Joined: March 02, 2005

Location: United States

Posted: April 20, 2005 at 1:33 PM / IP Logged

I just had my car tested and my factory amp has a blown channel, so only my front speakers in my car work. Is there any solutions you guys can come up with besides replacing the factory amp?

Back to Top

Lthlquicksilver

Member - Posts: 47

Joined: April 20, 2005

Location: United States

Posted: April 20, 2005 at 7:22 PM / IP Logged

I can't really think of a way short of repacing the factory amp or buying an aftermarket one. I would tell you to split off the working channels but factory systems are VERY ohm sensitive. If you change the resistance, all hell breaks loose. I think you're stuck my friend.

Back to Top

Search for other posts by Lthlquicksilver

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: April 21, 2005 at 8:27 AM / IP Logged

if you are running an aftermarket HU then you can rewire the speakers. just bypass the amp.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factory Amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.