5.25 and 6.5

Home / the12volt's Install Bay / Car Audio / 5.25 and 6.5 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Walkercustoms

Copper - Posts: 219

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 19, 2004

Location: United States

Posted: April 24, 2005 at 9:32 PM / IP Logged

Will a 6.5 fit in a 5.25 factory hole? I don't not remember but, I thought they were like the same I know that sounds stupid because one is 5.25 and the other is 6.5 but I thought the 6.5 would fit the factory holes of a 5.25.

Thanks

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 24, 2005 at 9:58 PM / IP Logged

What kind of car? If it is a civic then yes.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 24, 2005 at 10:33 PM / IP Logged

Generally the mounting holes are similar but the main issue usually comes in to play with the basket. Many decent 6 1/2's have baskets that wont fit into the factory hole with out some modification.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Walkercustoms

Copper - Posts: 219

Joined: May 19, 2004

Location: United States

Posted: April 25, 2005 at 7:19 AM / IP Logged

Its a 04 Monte Carlo the fronts are 5.25 and my guy wants some Memphis and all they have are 5 or 5x7 no 5.25.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 25, 2005 at 9:55 AM / IP Logged

Well generally 5.25=5.00. It should be difficult to build a baffle and install 6's in that car though.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Walkercustoms

Copper - Posts: 219

Joined: May 19, 2004

Location: United States

Posted: April 25, 2005 at 12:03 PM / IP Logged

So, the 5 will fit is what you are saying?

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 25, 2005 at 12:31 PM / IP Logged

Id say its a 90% chance that they will fit fine and a 100% chance that if they dont it would be about 5 minutes of fabrication to make them fit perfect.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

5.25 and 6.5

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.