alpine swe-1241

Home / the12volt's Install Bay / Car Audio / alpine swe-1241 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bumpingjeep

Copper - Posts: 149

Joined: September 12, 2004

Location: United States

Posted: April 28, 2005 at 9:41 PM / IP Logged

just picked up some type e's and was wanting to build a box to spec for these but there are no reccommended box sizes for anything other than type s and r...if anyone has any info on reccommended vented enclosure size i would greatly appreciate it

Back to Top

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: April 29, 2005 at 2:25 PM / IP Logged

Well, they don't give a recomended vented enclosure spec on the data sheet, only a sealed enclosure of .8-1.7cf3. I would recomend calling you local Alpine dealer and asking them. They might have the answers you need.

Chris

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

Back to Top

boardinbum

Silver - Posts: 358

Joined: February 07, 2005

Location: United States

Posted: April 30, 2005 at 3:57 AM / IP Logged

racer is right. They say 0.8-1.7ft^3 for sealed, and if you look at the specs, the sub is made for sealed, and making a vented/ported box would most likely end up sounding like crap, or blowing the sub... or both. I built a 1.57ft^3 sealed box for my single SWE-1242 to put in my Tacoma, and I loved it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine swe-1241

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.