'90 300zx amped sub install

Home / the12volt's Install Bay / Car Audio / '90 300zx amped sub install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: June 14, 2005 at 12:05 PM / IP Logged

Just looking for some input here. going to be installing an infinity basslink (10" amplified sub) into a 1990 nissan 300zx that has the bose system in it. The basslink accepts either hi or lo level input, i know how much of a pain it is to take apart the rear of the hatch in the 300 to grab the hi-level. so i was just wondering if it might be feasable to grab rear lo-level output from behind the radio on the 300zx? just trying to save a little time/labor on the job here.

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: June 14, 2005 at 1:35 PM / IP Logged

Head unit falls just about exactly between lo and hi level. I use a PIE PDC-LOC and grab the signal from the back of the radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'90 300zx amped sub install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.