Speed Sensor wire for a 2005 Accord

Home / the12volt's Install Bay / Car Audio / Speed Sensor wire for a 2005 Accord (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jkV6Accord

Member - Posts: 1

Joined: July 15, 2005

Location: United States

Posted: July 15, 2005 at 8:38 AM / IP Logged

Im trying to install an aftermarker Pioneer Navigation system in my dash. I read the previous post on the details of where the speed sensor wire is however when looking at the transmission block, I see a blue wire. I just dont want to burn the computer if i attach the wrong wire. Can someone please tell me the exact location. Thanks for your help.

chungo

Copper - Posts: 135

Joined: December 31, 2003

Location: United States

Posted: July 15, 2005 at 1:28 PM / IP Logged

Speed Sense	blue/white		ECM/PCM
Notes: The ECM/PCM is on the front of the transmission tunnel. The connectors are on the passenger side. On the 4 cylinder models the VSS wire is in the white 31 pin connector E, pin 26. On the 6 cylinder models it is in the gray connector A, pin 11.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speed Sensor wire for a 2005 Accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.