2 mtx 12 7500 series w/ bx1800d?

Home / the12volt's Install Bay / Car Audio / 2 mtx 12 7500 series w/ bx1800d? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shortys015

Member - Posts: 12

Joined: August 16, 2005

Location: Canada

Posted: August 16, 2005 at 7:18 PM / IP Logged

i have 2 mtx 12" 7500 series rated at 400watts rms ...i have a bx1800d because this amp is a monoblock amp i am wondering if i can still run these subs briged in series 2 mtx 12 7500 series w/ bx1800d? -- posted image.

P.S. my subs are dual 4 ohms voice coils

thanks in advance

Back to Top

ghostridersol

Member - Posts: 5

Joined: June 24, 2005

Posted: August 16, 2005 at 7:32 PM / IP Logged

of course you can run both subs of the 1 amp as long as your amps ohm load ratings will allow it.

Back to Top

shortys015

Member - Posts: 12

Joined: August 16, 2005

Location: Canada

Posted: August 16, 2005 at 7:44 PM / IP Logged

so i am looking for the specs @..... 4ohm X 2 = watts rms ?????

Back to Top

shortys015

Member - Posts: 12

Joined: August 16, 2005

Location: Canada

Posted: August 16, 2005 at 7:48 PM / IP Logged

this stuff gets me sooo confused...sorry

Back to Top

shortys015

Member - Posts: 12

Joined: August 16, 2005

Location: Canada

Posted: August 16, 2005 at 7:54 PM / IP Logged

ok would it be easier if i just connected them like one sub for each connection on the amp like there are 2 +'s and 2 -'s on the amp so would it be better to put the 4 wires in the 4 spots or can i draw more power bridging them?

Back to Top

ghostridersol

Member - Posts: 5

Joined: June 24, 2005

Posted: August 16, 2005 at 8:50 PM / IP Logged

shortys015 wrote:

ok would it be easier if i just connected them like one sub for each connection on the amp like there are 2 +'s and 2 -'s on the amp so would it be better to put the 4 wires in the 4 spots or can i draw more power bridging them?

If it is a mono block amp it is all 1 chan no mater how you hook them up

rockford wiring wizzard http://rockfordfosgate.com/rftech/wiringwizard.asp

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 mtx 12 7500 series w/ bx1800d?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.