Mounting enclosure for my mid drivers

Home / the12volt's Install Bay / Car Audio / Mounting enclosure for my mid drivers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

action1978

Member - Posts: 25

Joined: July 05, 2005

Location: United States

Posted: August 25, 2005 at 5:31 PM / IP Logged

I am building custom door panels to hold my 6-1/2 in mid drivers. What should I consider when it comes to sealed vs. vented enclosure for these speakers?

Thanks

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 25, 2005 at 9:08 PM / IP Logged

What kind of speakers are they? Do you have the T/S parameters for them?

Support the12volt.com

Back to Top

action1978

Member - Posts: 25

Joined: July 05, 2005

Location: United States

Posted: August 26, 2005 at 9:14 AM / IP Logged

They are some old alpine DD Drives. I don't have the data on them. But soon I plan to replace them with some Infinity Kappa's.

Back to Top

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 26, 2005 at 10:16 AM / IP Logged

You shouldn't need an enclosure for those speakers.

Support the12volt.com

Back to Top

action1978

Member - Posts: 25

Joined: July 05, 2005

Location: United States

Posted: August 26, 2005 at 11:19 AM / IP Logged

Okay, but I do need to build something to hold them. Should I just leave the back of the speaker open? what about the ones in the rear of the car, what kind of difference am I going to see if they are enclosed or if the backs of the speakers are just open? None?

Also, thanks for your help. I usually get a lot more replies to questions on here.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mounting enclosure for my mid drivers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.