Need an Amp...

Home / the12volt's Install Bay / Car Audio / Need an Amp... (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

aviviii

Member - Posts: 2

Joined: September 14, 2005

Location: United States

Posted: September 14, 2005 at 12:41 AM / IP Logged

I know I could keep looking and pouring over company websites and review pages, but I don't feel like I have any direction. I have an Image Dynamics IDMAX 12" sub with dual 2 ohm voice coils. I am looking for an amp to make this baby hum. I am equally as interested in SQ as I am in SPL, so It has to be of high quality and would prefer it to not be Class D. I'm planning on wiring the VCs in parallel, so I would need an amp that is going to provide a signal around 800 watts x 1 channel at 1 ohm. Any suggestions are appreciated.

Back to Top

sneakycyber

Silver - Posts: 413

Joined: September 13, 2005

Location: United States

Posted: September 14, 2005 at 12:58 AM / IP Logged

Take a look at USA amps they are very stable and very powerfull. If your going for SQ I reccomend a sealed enclosure. I posted on another thread the differences between ported and sealed. If you have any more questions feel free to ask. JL audio amps are also a good choice for SQ their amps are the "cleanest" in the industry. meaning they do not introduce any noise into the system from their power supplies. They are also very powerfull.

Back to Top

aviviii

Member - Posts: 2

Joined: September 14, 2005

Location: United States

Posted: September 14, 2005 at 7:57 PM / IP Logged

I have looked at the and also at the DLS Ultimate A6, whcih seems to fit the bill a little better. If anyone has any other sugestions on wiring and amp set-ups, I'm all ears. Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need an Amp...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.