the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

subwoofer enclosure volume? important?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Teslank 
Member - Posts: 29
Member spacespace
Joined: May 14, 2004
Location: Canada
Posted: September 28, 2005 at 7:37 PM / IP Logged  

hi again folks here is my question! :P

i have my marvelous lightning Audio 12 S4.12.4 300rms sub. it is currently in a airtight(leaking from a ****in bolt) sealed enclosure of  0.933 cubic feet

in the manual it says recommended sealed 1.25 cubic feet.

okay so is it a problem of having a little box? can i have a bigger box than 1.25 ???

im searching for the best sound and power and i listen to pretty much everything.

and i want to know what effect of having a little/bigger volume of a box on the bass(punching, grooving....)

and what settings of my crossover ;)

thanks for your time folks!

Teslank

Teslank 
Member - Posts: 29
Member spacespace
Joined: May 14, 2004
Location: Canada
Posted: September 28, 2005 at 7:52 PM / IP Logged  

can i add stufing material? using materials commonly found in a house or in a store....

dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: September 28, 2005 at 8:15 PM / IP Logged  

There isn't too much of a problem with having the sub in too small of an enclosure but rather a difference in sound output. A samller enclosure will generally put more emphasis on upper freqeuncy ranges and more or less make it sound a little more punchy. However too small of a box will yield over all low output.

Going larger will bring the tuning freq lower, thus giving it more emphasis on the lower frequencies. And yes going too big isn't a great idea.

Using poly fill can aid if your box is on the small side, it just isn't going to work miracles. Try it, it is an inexpnsive solution. And seal that box up, put some glue or caulking in that hole!

ss-installer 
Silver - Posts: 444
Silver spacespace
Joined: February 27, 2005
Location: United States
Posted: September 28, 2005 at 8:16 PM / IP Logged  
go to walmart and buy a one pound bag of polyfill. one pound will add 40% airspace.
youngone 
Silver - Posts: 269
Silver spacespace
Joined: September 28, 2005
Location: United States
Posted: September 28, 2005 at 8:39 PM / IP Logged  
as fare as your crossover gose you gust have to play with it. but be careful with your gain setings if you have one. the thing you have to be careful of is seting it to high which can cause clipping not good. as for your low and high pass filters it depends on the frequency that you want to eliminate. low pass filters out frequencys above a set point. high pass filters out frequences below a set point.
Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend
On the12volt you give some info and you get in

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer