98 deville radio

Home / the12volt's Install Bay / Car Audio / 98 deville radio (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 04, 2005 at 6:56 AM / IP Logged

Is there a speical way to install any aftermaket components in the 98 deville base model no bose no amp because recently installed a radio into a 98 deville now the customer tell me after a few hours the car seems to be in sleep mode. What am I 2 do should someway leave the factory radio in somehow.

jstruckman

Copper - Posts: 465

Joined: May 03, 2004

Posted: October 04, 2005 at 9:51 AM / IP Logged

Yes, you need to relocate the factory radio.

Jazzy

bazzgazm

Copper - Posts: 113

Joined: June 06, 2004

Location: United States

Posted: October 04, 2005 at 9:54 AM / IP Logged

i'm not familiar with 98's needing a relocation. JAy if you could explain more so what's going on it'd be alot easier to help you out. I.e. what exactly is going on and after the components, or after the deck did this problem occur?

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 04, 2005 at 6:11 PM / IP Logged

Well I had the car for a day or two now and it seem like it is not consistent it only does after the car sits over a long period of time. ( a hour or two) But the car conpentents work fine after you start the car. Without starting the the aftermarket alarm won't respond. So I tried ran a sperate 12volt to the alarm and radio and now it respond but the car seems to still be in sleep mode I.e. No dome light cluster resets etc.

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 06, 2005 at 2:11 PM / IP Logged

Plz help somebody

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 06, 2005 at 6:06 PM / IP Logged

what data module did you use when you installed the HU?

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 06, 2005 at 8:53 PM / IP Logged

I didn't use a date module.

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 06, 2005 at 9:00 PM / IP Logged

I didn't use a date module.

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 07, 2005 at 1:21 PM / IP Logged

i think you just answered your own question..... use the GMRC-03 for a stable, proper install.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: October 07, 2005 at 1:24 PM / IP Logged

Thx will do.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.