amp wiring problems

Home / the12volt's Install Bay / Car Audio / amp wiring problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bginamercedes1

Member - Posts: 40

Joined: April 30, 2005

Posted: October 05, 2005 at 12:40 AM / IP Logged

i have a Phoenix Gold Octane-R 8.0:4 R8.0:4 amp (200watts rms) and when i plug in the audio input i get a engin hiz on the bottom audio ports.... i was wondering if i just wire up all 4 speackers to the top port ( the frount set) will all the power be transferd and then i can run all 4 speakers clean.????? or will this just kinda kill the amp?????

Back to Top

Search for other posts by bginamercedes1

dwarren

Platinum - Nominee - Posts: 1,811

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 03, 2004

Location: California, United States

Posted: October 05, 2005 at 1:13 AM / IP Logged

You will more than likely run into a problem doing this. My guess is it will present the incorrect load and you will have bigger issues.

Some more info might help here. Are you using an aftermarket deck? Hve you tried switching the rca's and see if it is indeed the amp and not the rca's?

Back to Top

fingaz22

Silver - Posts: 410

Joined: March 11, 2005

Location: United States

Posted: October 05, 2005 at 9:40 AM / IP Logged

this happened to a clarion drx i had . it was a bad ground on the main board of the radio. or it could just a bad external ground.like dwarren said switch out the rca's first and go from there. lol

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

bginamercedes1

Member - Posts: 40

Joined: April 30, 2005

Posted: October 05, 2005 at 7:21 PM / IP Logged

i have focal speakers and a alpine deck and i think it could be the rca's..... ill try it out in 1 hour

Back to Top

bginamercedes1

Member - Posts: 40

Joined: April 30, 2005

Posted: October 05, 2005 at 11:09 PM / IP Logged

ok i tryed it all out and did some rewiring and i fixed it.... i just got the magic touch.. thanks to every one who posted.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp wiring problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.