High / Low level amp inputs

Home / the12volt's Install Bay / Car Audio / High / Low level amp inputs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

action1978

Member - Posts: 25

Joined: July 05, 2005

Location: United States

Posted: October 13, 2005 at 6:00 PM / IP Logged

I searched for this information and couldn't find an answer to my question.

Heres the situation. After spending money on a high end HU, mono amp and sub I ran into some finincial trouble and bought a super crappy amp for my mids. (fear not, this is only temporary so I can hear some music until I can afford the amps I really want.)

The Audiovox amp I got has both RCA (low level) and speaker (high level) inputs. The label says "High Level 2V - 10V" & "Low level 0.2V - 2V" My concern is that my HU puts out 5V.

Can I forget the label and plug my RCA's into the low level input? What would I be risking?

Should I make an adapter so that I can plug the RCA's into the speaker level inputs? If so, which connection on an RCA is positive?

Or should I quit being a cheap ass, ditch the audiovox, and jam out to the noise of my motor until I can afford the good stuff?

Back to Top

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: October 13, 2005 at 7:00 PM / IP Logged

dumping the audiovox would be a good idea but the issue with the rca preamp voltage can be compacated at the gain control for you rca inputs at the amp. thats if that amp has them. it should, two small holes on either side of the rca's. just keep them down to like a 1/4 of the way. you should be fine untill you get ya a real amp then you can learn about adjusting your systems gains the right way by doing some research in this forum or on this website. hoped i helped.lol

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

High / Low level amp inputs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.