Slot port with right angle bend, length?
Home /
the12volt's Install Bay /
Car Audio / Slot port with right angle bend, length? (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: November 06, 2005 at 1:36 PM / IP Logged
I am building a slot ported box for a Kicker CVR12. I would like to have the slot port come up the back of the box and then make a right angle bend and exit out the front.
I have searched and read everything I can get my hands on about slot ports but I haven't been able to find anything on determining the length of a slot port with a right angle bend.
To find the length of the slot port in the picture would I measure along the red line?
Posted: November 06, 2005 at 1:45 PM / IP Logged
Posted: November 06, 2005 at 1:46 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
