high to low impedance converter

Home / the12volt's Install Bay / Car Audio / high to low impedance converter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nixon75

Member - Posts: 27

Joined: October 23, 2005

Location: Philippines

Posted: December 11, 2005 at 8:50 PM / IP Logged

whats a hight to low impedance converter for? how to use it?

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 11, 2005 at 9:00 PM / IP Logged

There are high to low adapters for the signal. But not for the impedance.

These are used for decks with no pre outs (RCA's) or factory radios

They are basically wired into the factory wires or speakrs to obtain a signal for the input stage of an amplifier

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: December 11, 2005 at 9:01 PM / IP Logged

it takes a high voltage signal and drops it down to a low voltage for the low voltage requirment on an aftermarket amp witch is commonly inbetween under one volt and upwards of 5 volts.

it will let you hook up a hu that dont have rca's and convert them so you do in simple terms

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

high to low impedance converter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.