Jl XR Components

Home / the12volt's Install Bay / Car Audio / Jl XR Components (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: December 15, 2005 at 7:09 PM / IP Logged

I have questions that i need answers for....

WEll I m planning o buying the JL XR Components the 6 1/2 in the front and 5x7 in the rear, and i wanted to knw if it was a good idea to just run the 6 1/2 ones with an amp since i got a rockford punch 400s, and the rears on the head unit??

Or do you thing i jus should buy a 4way amp to run them all?? If so i was looking at the JL 300/2 slasher series amp would this be a good amp??

-thanks-

Back to Top

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: December 15, 2005 at 7:25 PM / IP Logged

JL XR series components or coax would be a waste of money without an amp. Buy a 4 chan. amp, the 300/4 would do fine.

There is no such thing as free installation!

Back to Top

sedate

Silver - Posts: 1,173

Joined: July 03, 2004

Location: Colorado, United States

Posted: December 15, 2005 at 11:43 PM / IP Logged

Uhh.

I wouldn't do this myself, I think the 4-channel idea is a much cleaner method of installation...

BUT, you *can* just run the front channels off of that RF amp you already have... 100x2 should more than take care of those XR's... then just leave the coaxials you already have in the back and run them deck power.

That way you'd save the $$$ on an amp AND a set of expensive coaxials.

To be honest, it would sound darn near the same as an amped 4-channel system, after the rears are all properly attenuated and what-not. I'd try that first just to hold onto my $400...

"I'm finished!" - Daniel Plainview

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: December 16, 2005 at 2:10 AM / IP Logged

cool thanks......

well I might sell the rockford amp to one of my friends so I can buy a JL Amp 300/4, if i cant sell the amo then i will go with sedate idea and just run the fronts and keep my coaxils....

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Jl XR Components

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.