the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

line output converter wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
newjeeper 
Member - Posts: 3
Member spacespace
Joined: December 18, 2005
Location: United States
Posted: December 18, 2005 at 11:35 PM / IP Logged  
I am putting a system in a 2001 jeep cherokee and because i am keeping the factory hu and also using my x-over i am putting in a loc. I dont know how to wire this and don't have the instructions as i got it from my brother who lost them. He doesn't know how to install it either. It is a pac isn8. any help is greatly appreciated.
redpeppers 
Silver - Posts: 483
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: December 19, 2005 at 12:01 AM / IP Logged  
just wire it onto the speaker wire outputs behind the factory radio....some of those factory radios even tell u the wire colors on the chasis of the radio
Where theres is a wire there's a way.
newjeeper 
Member - Posts: 3
Member spacespace
Joined: December 18, 2005
Location: United States
Posted: December 19, 2005 at 12:10 AM / IP Logged  
i did but i saw somewhere that it had to be right at the hu or it wouldn't work. also, is it just positive to positive and neg to neg? are the brown wires extra for a ground if necessary
redpeppers 
Silver - Posts: 483
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: December 19, 2005 at 12:52 AM / IP Logged  

yes the brown wires r not ness. most of the time.

i always just wire them up behind the radio because it makes it easy to plug in when u swap out the factory radio for an aftermarket..

Where theres is a wire there's a way.
newjeeper 
Member - Posts: 3
Member spacespace
Joined: December 18, 2005
Location: United States
Posted: December 19, 2005 at 11:01 PM / IP Logged  
i think my converter must be bad because i did this and i still have no bass, i checked for power probs and found none? clueless, maybe time to pay for help?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer