GM Scan Tool

Home / the12volt's Install Bay / Car Audio / GM Scan Tool (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 06, 2006 at 11:27 AM / IP Logged

Does anyone know what the procedure is for resetting the Class II radio's on a GM scan tool ? I have one that needs to be reset to another vehicle & my friend with the scan tool has never reset a radio with a new VIN before. TIA

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 06, 2006 at 5:09 PM / IP Logged

you need to do radio setup which will burn the VIN into the radio.... go into body, special features and radio setup....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 07, 2006 at 11:10 AM / IP Logged

Depending on the radio the Tech II may not set up the radio. Some truck radios require software be downloaded from a dealers computer through the use of a Tech II tool.

sparky

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 07, 2006 at 2:11 PM / IP Logged

depending on the chassis you may also need the CANDI module attached to the Tech II.......

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

GM Scan Tool

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.