pioneer 8600MP, Audio Configuration?

Home / the12volt's Install Bay / Car Audio / pioneer 8600MP, Audio Configuration? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nikel

Member - Posts: 10

Joined: June 05, 2005

Location: Turkey

Posted: January 18, 2006 at 7:39 AM / IP Logged

hello

i have pioneer 8600MP head unit

this HU gives bass sound to door speakers (FR,FL,RL,RR) and the sub woofer equally

i just want to hear bass from sub woofer, how can i configure that?

is it something with STD and NW mode?

what are they exactly?

i read all the manual but couldnt find any solution

tahnks for reading

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: January 19, 2006 at 8:50 AM / IP Logged

It sounds to me like you're using the headunit to power the speakers. You can use a 4 channel amp with the crossover set to high pass.

My ex once told me I have a perfect face for radio.

Back to Top

nikel

Member - Posts: 10

Joined: June 05, 2005

Location: Turkey

Posted: January 19, 2006 at 10:26 AM / IP Logged

i am sorry it was my foult to not tell you every thing about my system;

i have rockford fosgate 4*40 RMS amplifier, they are connected to door components, they are set to high pass

my another amplifier is audioson sx2 that is 600RMS and connected to 38CM rockford woofer

my problem is with this ....ing head unit

i am sure i have connected everything correct about head unit amps etc, and i am sure i have set amplifier correct...

my problem is with this ....ing pioneer 8600 MP head unit!!!, i cannot configure it

i wish i didnt buy it

Back to Top

ghettob

Member - Posts: 12

Joined: April 20, 2006

Location: United States

Posted: April 24, 2006 at 10:09 PM / IP Logged

plug ur sub amp into the sub output

if the mid amp is hooked to the front or rear outputs in the radio set the frequency response accordingly front hpf on -6 or -12 DB and/or put freq respnse curve on 125Hz or higher

if using both rear and front set the rear hpf to the same or lower if u want a litlle more bass out of the rear mids

the hpf for front and rear are the 4 options in the auido menu after the three suboutput options

b

Back to Top

dstang24

Copper - Posts: 98

Joined: September 06, 2005

Location: United States

Posted: April 25, 2006 at 12:46 AM / IP Logged

hook up the microphone that came with that deck and perform the auto equallizer and time alignment. It should set the crossovers at a good level... turn your amplifiers cross overs off. I have had this deck for the last year and a half so if you have any questions about it PM me.

Dstang24

Team Edge Audio

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer 8600MP, Audio Configuration?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.