Massive Sub Wiring

Home / the12volt's Install Bay / Car Audio / Massive Sub Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Walkercustoms

Copper - Posts: 219

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 19, 2004

Location: United States

Posted: January 31, 2006 at 12:22 PM / IP Logged

I have a guy that wants 6 Kicker Free Airs installed and be pushed by an old punch45. Yes, I know what is he thinking but, you know how it is his buddy said he had it hooked up that way and so on. Now, he has check this out 4 4ohm and 2 8ohm subs. Is there anyway I could hook these up to the old punch so, I can get him out of my hair?

Thanks

Back to Top

Walkercustoms

Copper - Posts: 219

Joined: May 19, 2004

Location: United States

Posted: January 31, 2006 at 2:34 PM / IP Logged

It is a Punch 200 DSM 2-Ch not a punch45. The specs are as follows 100x2@4ohm, 200x2@2ohm and 400 per mono block at 4ohm. Any help with hooking up would be great with the sub setup I posted before. It will have to be seris and parr I assume.

Thanks

Back to Top

DYohn

Moderator - Posts: 10,741

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: January 31, 2006 at 3:20 PM / IP Logged

It's a strange configuration and it'll have loudness imbalances, but I'd wire it as two sets of 8-ohm loads in parallel. Use the 4-ohm woofers in series-parallel and the 8-ohms in parallel as below, and connect each set to one channel of the amp as a 4-ohm load.

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Massive Sub Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.