Running Power Cable, 2000 Eclipse

Home / the12volt's Install Bay / Car Audio / Running Power Cable, 2000 Eclipse (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

edoughty

Member - Posts: 2

Joined: January 14, 2006

Location: United States

Posted: February 08, 2006 at 10:54 AM / IP Logged

Hey, im in the middle of an install at work on a 2000 eclipse and need a little help. just wondering where the best place to run the power cable through the firewall is at on these cars. im tryin not to have to drill a new hole. can anybody help me out in a pinch. thanks in advance-Eric

Back to Top

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: February 08, 2006 at 4:06 PM / IP Logged

if you don't want to drill a hole, you'll have to find a gromet that has enough room to run your cable through. if its 4 ga. or bigger, i doubt you'll find one.

Back to Top

warpedimage3

Copper - Posts: 90

Joined: September 16, 2005

Location: United States

Posted: February 08, 2006 at 5:11 PM / IP Logged

if the car is an automatic, then you can drill through the clutch plate where the clutch would have been there is nothing blocking it on either side.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Running Power Cable, 2000 Eclipse

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.