remote wiring

Home / the12volt's Install Bay / Car Audio / remote wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cunderdown

Member - Posts: 1

Joined: February 09, 2006

Location: United Kingdom

Posted: February 09, 2006 at 3:09 AM / IP Logged

I wired up my amp to my sub and connected the remote wire to the back of the headunit, but when i turn of the ignition my amp stays on. I think i wired it up properly it was to plugs straight into the back of the the headunit. Ive got a citroen saxo 1998 and a kenwood headunit. cheers Craig

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: February 09, 2006 at 10:17 PM / IP Logged

The remote wire run to the amp should be connected to the Kenwood's blue/white wire, which will switch on and off with the radio. Note that on some lower end Kenwood decks, this wire is actually a dummy wire and you use the blue wire instead.

My ex once told me I have a perfect face for radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.