06 Charger Amp with OEM HU

Home / the12volt's Install Bay / Car Audio / 06 Charger Amp with OEM HU (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nexdeci

Member - Posts: 28

Joined: December 29, 2005

Location: United States

Posted: March 07, 2006 at 7:59 PM / IP Logged

I need to add an amp and subs to an 06 Charger OEM head unit. It's the standard head unit , not the navigation one. I'm wondering if anyone here has worked with these yet and can tell me the best way to go about this.

xscash

Copper - Posts: 317

Joined: March 05, 2006

Location: United States

Posted: March 07, 2006 at 8:04 PM / IP Logged

the remote turn on wire is a can-bus wire....so you will have to go to an ign. wire or use a sensor for turn on. use a hi to lo converter off the rear sub for your rca's

nexdeci

Member - Posts: 28

Joined: December 29, 2005

Location: United States

Posted: March 07, 2006 at 10:15 PM / IP Logged

It's a 6 speaker system. There is no sub in the vehicle. It's got seperates in the front and 2 speakers in the rear deck. Will there be a sub wire on the HU that's not being used? Just trying to get a heads up on what I'm going to need before this car gets into the bay and pulled apart for surprises.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: March 07, 2006 at 10:40 PM / IP Logged

The rear speaker signal is full range. I would just tap into the rear speaker wires at the back deck and do my high level converter back there. As for remote turn on I would just tap the acc at the column and fuse the line with like a 2 amp fuse. No need to pull the deck out at all.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 08, 2006 at 2:59 AM / IP Logged

But if you tapped the ACC, that would mean the amp would turn on every time the ignition is on or the vehicle is being driven even if the head unit is off ....

xscash

Copper - Posts: 317

Joined: March 05, 2006

Location: United States

Posted: March 08, 2006 at 9:14 PM / IP Logged

that is correct...acc will turn on every time...or use a line sensor that will pick up the speakers and turn on the amp.

the only radio i worked on has a 6 channel system...2 fronts ..2 rears...a center...and a sub. the rear under panel needs to be removed to expose the sub.

metra has all factory amp wire colors. i do not have the paperwork from the last one i did or i would post it.sry

hope this helps, xs

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 Charger Amp with OEM HU

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.