Hifonics Amplifier Protection Mode

Home / the12volt's Install Bay / Car Audio / Hifonics Amplifier Protection Mode (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thebled88

Member - Posts: 1

Joined: April 02, 2006

Location: United States

Posted: April 02, 2006 at 11:20 PM / IP Logged

-Alpine 2897 HU

-2 Infinity Kap 6.5

^Pioneer 200.2

-2 Premier 10"

^Hifonics 3000.1

-LA 1 farad

My problem is that when i turn my volume around 16+,(normally listen at 26) my sub amp will enter protection mode. Only the sub amplifier. I have 2 seperate power wires going to each amp from the battery. I share the remote turn-on wire. Seperate interconnects. Capacitor is used only by sub amp. Im thinking that somewhere between the capacitor and amp is the problem.

im going to pull the cap and run straight battery power to the amp tommorw and see how it runs

Anyone else ever had a protection mode on a hifonics or experienced anything similar????

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: April 03, 2006 at 12:05 AM / IP Logged

what impedance are your subs? what load is that amp stable to?

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hifonics Amplifier Protection Mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.