Older Pioneer Harnesses Colors?

Home / the12volt's Install Bay / Car Audio / Older Pioneer Harnesses Colors? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Big Purds

Silver - Posts: 574

Joined: November 25, 2002

Location: Canada

Posted: January 04, 2003 at 5:57 PM / IP Logged

I have to do a re and re for a friend of mine, basically swapping a Sony that I installed for him out of his truck that he is selling and replacing it with an older Pioneer tape deck, model KEH-P4200...

I am trying to figure out the speaker colors out of the harness...

I have the following from L to R:

Black (solid) - Ground

Black / Wht stripe - ?

Gray / Red stripe - ?

Black / Green stripe - ?

Green / Red stripe - ?

Orange (solid) - constant

Green (solid) - ?

blank

Gray (solid) - ?

Gray / Black stripe - ?

Red (solid) - ignition

Blue (solid) - remote

now, is that blank supposed to be blank, or has a wire been pulled out of the harness? and what do each of the other wires control as far as directionally (RF LF RR LR)?

any help would be greatly appreciated...I know some of you guys have been in this game long enough to know what these colors are...

thanks,

Big Purds

Back to Top

derl

Member - Posts: 33

Joined: December 21, 2002

Location: Georgia, United States

Posted: January 05, 2003 at 8:26 AM / IP Logged

Here is the correct wiring for the older model pioneers:

Orange: constant

Red: ignition

Black: ground

Blue: remote turn-on

grey: right front (+)

grey/black: right front (-)

green: left front (+)

GREEN/ black: left front (-)

grey/red: right rear (+)

BLACK/ grey: right rear (-)

GREEN/ red: left rear (+)

BLACK/ green: left rear (-)

that is not a BLACK/ white wire you have it is actually grey. The empty slot in your harness is where the negative wire for the left front (-) should be. You need a new harness. Do not use the negative from another speaker wire in lieu of the one that is missing.

Hope this helps. You may want to try to go by a local shop. Sometimes you can pop a wire/connector out of another harness and snap it into the slot. Sometimes.

~~Derl~~

drummer_ga@hotmail.com

Back to Top

albags2002

Member - Posts: 1

Joined: January 26, 2003

Location: United Kingdom

Posted: January 26, 2003 at 2:57 PM / IP Logged

Hi!

Well...... If it wasnt of use to him.... It was to me. I just bought a Pioneer DEH 345R from eBay without a manual, for use on my second (runaround) motor.

Any ideas where I can get a copy of the manual from? Quite happy to pay for the privilege, by whatever means!

Thanks a lot!

Al... UK.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Older Pioneer Harnesses Colors?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.