Hole to AMP12V+ from Inside to Bat on Altima?

Home / the12volt's Install Bay / Car Audio / Hole to AMP12V+ from Inside to Bat on Altima? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

TacomaXray

Member - Posts: 13

Joined: September 09, 2002

Location: United States

Posted: January 04, 2003 at 6:08 PM / IP Logged

I have a Nissan Altima 97 ... I have everything hooked up ... but I cant find a hole on the chassy so I can make the wire go from the inside of the vehicle to the battery ....

I was hoping there was a Hole near the Clutch Pedal like in MY older car but no.

Tacoma _Lucas_ Gangster

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 04, 2003 at 6:19 PM / IP Logged

What gauage wire are you using ? If it's only 8 gauage you can cut into the wiring boot of the main harness and slip it through there.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

TacomaXray

Member - Posts: 13

Joined: September 09, 2002

Location: United States

Posted: January 04, 2003 at 6:21 PM / IP Logged

Thank you Jeff... now... do you know where I can find the " wiring boot of the main harness "??? in the Fuse Box?

Tacoma _Lucas_ Gangster

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 04, 2003 at 6:31 PM / IP Logged

Look under the dash by the gas pedal/brake area aginst the firewall. Look for the rubber boot that you can slit into and pass the wire through this boot. Doesn't matter if it's the main one or not, just find one and pass the wire through it.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hole to AMP12V+ from Inside to Bat on Altima?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.