blowing a fuse and illumination problem

OK heres the scoop i have a 1997 eclipse spyder. I recently took out my xplod deck i was borrowing from a friend and put in my new eclipse 3404 deck. i made sure all of my wires were fine and i got a proper ground. the first thing i noticed after all the wires were on. My illumination would not turn on my gauges work but no glow out of them. also neither of my dimmer works either. so i of course rewired it and checkedfor any frays or open wires which they were all fine. then i put it back in and my friend said my tail lights were out and i immediately changed the fuse but by thenit blew instantly so after trial and error . i finnaly figured out when my deck was on it would blow a fuse. i have no idea iv checked wires their all good, btw i have 2 jl audio w3s and a memphis 1000d if that helps thanks adam OK heres the scoop i have a 1997 eclipse spyder. I recently took out my xplod deck i was borrowing from a friend and put in my new eclipse 3404 deck. i made sure all of my wires were fine and i got a proper ground. the first thing i noticed after all the wires were on. My illumination would not turn on my gauges work but no glow out of them. also neither of my dimmer works either. so i of course rewired it and checkedfor any frays or open wires which they were all fine. then i put it back in and my friend said my tail lights were out and i immediately changed the fuse but by thenit blew instantly so after trial and error . i finnaly figured out when my deck was on it would blow a fuse. i have no idea iv checked wires their all good, btw i have 2 jl audio w3s and a memphis 1000d if that helps thanks adam2 12 inch jl audio w3s stock infinity sound eclipse deck memphis 1000d

also if i put the illumination wire to the power wire it lights up and same with dimmer did i short them out how could i fix them do i need a new wiring harness adam2 12 inch jl audio w3s stock infinity sound eclipse deck memphis 1000d

ok now what will i expect will it still turn on thanks adam and if it is the ground what can i do to fix it adam2 12 inch jl audio w3s stock infinity sound eclipse deck memphis 1000d

how do you run a new ground wire try a different spot or new whole wire adam2 12 inch jl audio w3s stock infinity sound eclipse deck memphis 1000d

just find a peace of metel that is connected to the body of the car. Put a lopp on the wire and bolt it to the metal.

ok i disconnected the ground wire and the illumination still doesnt turn on and the fuses are still good2 12 inch jl audio w3s stock infinity sound eclipse deck memphis 1000d