Deck Preouts stopped working

My preout for my amp just stopped sendin a signal to my amp. It a kenwood kdc-mp4028. I reseted the deck, it worked for a min then stopped again. Wha can i do to fix it? Is there a way to fix it?Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

Is it the deck? Have you checked for ac voltage on the pre outs? Or are you just unplugging then plugging back in.When you check for voltage make sure nothing is connected. But in saying that Kenwood decks are notorious for dry solder joints on the main circuit board where the pre outs are, if this is the case you'll need to srtip the unit down, pull out the board and reflow the joints and re assemble.  When I was still doing repairs I used to get 8-10 units a week with the same problem.WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

So i just add some solder to the pre out joint? Can u please post a pic to show me how and wha part to do it, it would help me out a lot. Thanks.Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

After checking all other possibilities then take it to a repair agent it might sound easy but it's not.WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Well i put in a panasonic deck and same problem. Then i ran a tv rca to the amp and still nothing. Then i ran out of ideas and gave up. . . but when i put my amp in my friend's car it works . I also tested the sub and it works. I need help! Anyone?Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

In that case the problem has to be in the wiring, check everything like voltage, shorts or breaks in the speaker wiring, remote wire, are you getting a good earth? and so.WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

yeah sounds confusing, because you say everything works, amp and subs... gotta love you austrailians.. earth umm, may sound retarded, but does your head unit have a mode where it will disable the preouts?99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

I can turn my subwoofer preout off, but im sure it is on. Also tv rcas work the same as car rcas right? Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.

kirktcashalini wrote: yeah sounds confusing, because you say everything works, amp and subs... gotta love you austrailians.. earth umm, may sound retarded, but does your head unit have a mode where it will disable the preouts?

LOL earth ground same sh*t different smell

I wouldn't be surprised if the preouts are disabled or turned down LOL

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.