connecting kenwood KAC-649S and KAC-9152D

Home / the12volt's Install Bay / Car Audio / connecting kenwood KAC-649S and KAC-9152D (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

j3ja

Member - Posts: 3

Joined: January 06, 2005

Location: Philippines

Posted: June 25, 2006 at 2:35 AM / IP Logged

hi,

i have an existing amp Kenwood KAC-649S 320 watts max power (powering my mains 2 front + 2 rear).

I recently bought a Kenwood KAC-9152D 1800 watts max power and KFC-W3514DVC sub. My idea is to connect the LINE OUT of the KAC-649S to the LINE IN of the KAC-9152D to get the signal.

Is this the proper way to connect the 2 amps? Any suggestions pls. Thank you.

rej

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: June 25, 2006 at 7:15 PM / IP Logged

If your deck has sub preouts, I'd use those instead. If not, you can do it the way you described or just use some rca splitters off the front or rears.

My ex once told me I have a perfect face for radio.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

connecting kenwood KAC-649S and KAC-9152D

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.