Line Driver

Home / the12volt's Install Bay / Car Audio / Line Driver (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mtmas8

Member - Posts: 17

Joined: May 08, 2006

Location: United States

Posted: July 19, 2006 at 1:57 PM / IP Logged

My headunit+signal processor currently is giving out a 4V pre-amp output and i was looking into purchasing a line driver which claims to give a 10v preamp output. will this work out if my subs are on a 10v preamp and my components are on a 4v preamp or should i hae the both the same, also i would be powering 1000/1 jl audo mono amp with 10v's will that be able to handle it?

Alpine D310 HeadUnit

Alpine PHX-H701 Signal Processor

(2) JL 13W7 Subs

(2) JL 1000/1 Amps

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 19, 2006 at 3:35 PM / IP Logged

It won't matter at all as long as you set each amplifier's gain properly.

Support the12volt.com

Back to Top

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: July 19, 2006 at 4:06 PM / IP Logged

How about the good old question, why do you feel you need one? More devices in the signal path offer more chances for the introduction of noise.

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: July 19, 2006 at 5:39 PM / IP Logged

not sure on the JL's but I know almost all product will not take much more then 5-6v input. The high end eclipse amps will take up to 8v but I havent seen much besides that

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Line Driver

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.