Wiring layout 95 Mercury Villager

Home / the12volt's Install Bay / Car Audio / Wiring layout 95 Mercury Villager (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

myself2

Member - Posts: 1

Joined: June 04, 2005

Location: United States

Posted: August 21, 2006 at 11:56 AM / IP Logged

Hello to all. My dilema is that I have a radio that I have to install into a 95 Mercury Villager which has a factory amp. I got the wire harness that goes along with it but noticed that only the power,ground,illumination connection can be used due to the fact of the factory amp. I was wondering if anyone could assist me in installing this from the radio plug output to the amp. Or should I just bypass the amp and run wires to the back where the outputs go to the speakers? Any info would be greatly appreciated.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: August 21, 2006 at 9:04 PM / IP Logged

It sounds like you got this harness: http://www.scosche.com/scosche_caraudio.aspx?ItemID=FD02B&CategoryID=78

Take it back and get this one: http://www.scosche.com/scosche_caraudio.aspx?ItemID=FDK4B&CategoryID=78

It should be a straight forward install after that. Be sure to connect the factory amp turn on lead (maybe blue or blue/white).

My ex once told me I have a perfect face for radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring layout 95 Mercury Villager

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.