How does a factory Remote wire work

Home / the12volt's Install Bay / Car Audio / How does a factory Remote wire work (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sub-zero

Member - Posts: 3

Joined: September 21, 2006

Location: United States

Posted: September 21, 2006 at 9:56 PM / IP Logged

i would like to know how an automobile remote turn on system work. I am curious because i want wire up my car stereo equipment in my room all in a nice box shelf. How do i make a remote turn on for the set up when it is not hooked up to a car. Thanks everyone.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 21, 2006 at 10:14 PM / IP Logged

All it does is supply +12V when the radio is turned on.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

sub-zero

Member - Posts: 3

Joined: September 21, 2006

Location: United States

Posted: September 22, 2006 at 7:57 PM / IP Logged

So can i just ignore the blue remote wire on the radio and supply 12 volts to the radio from a car battery, or should i hook up the blue remote wire from the radio to the amps while plug in to the battery.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 22, 2006 at 8:36 PM / IP Logged

Well, if you are just hooking up the radio then you want to power the yellow(constant) and the red(acc) wire and then ground the black(ground) wire. If you are using an amp then you need to worry about the blue wire otherwise leave it unhooked.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

sub-zero

Member - Posts: 3

Joined: September 21, 2006

Location: United States

Posted: October 02, 2006 at 6:36 PM / IP Logged

I would like to connect both my amps and sub woofer all together with the radio.

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: October 03, 2006 at 3:57 PM / IP Logged

you should buy a good size inverter (ac to dc) to power your radio and amp(s).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How does a factory Remote wire work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.