Sub & Amp compatibility

Home / the12volt's Install Bay / Car Audio / Sub & Amp compatibility (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

1997AvengerES

Member - Posts: 3

Joined: January 25, 2003

Location: United States

Posted: January 25, 2003 at 3:01 PM / IP Logged

I was wondering If I had 2 of the

OV2-1200's Sub & Amp compatibility -- posted image.

wired to a single

MOFO-12

• 2400 watts power handling

• 270 oz. magnet

• 3” BASV/Kapton Hybrid 18 AWG

Voice Coil

• SPL 90 dB

• Sealed box: N/A

• Ported box: 2.4 cu..Ft.

• Tuning: 40 Hz

• Port size: 3”(dia)x8.75”(length)

• # of ports: 2

if It would sound good if the amps are both 2 ohm stable and the sub has dual 1 Ohm Voice coils

any comments would help alot THX

|||||||1997 Doge Avenger ES was here|||||||

fakepete

Copper - Posts: 99

Joined: April 21, 2002

Location: United States

Posted: January 25, 2003 at 7:38 PM / IP Logged

If the amps are only 2ohm stable then you cannot connect them to a 1 ohm load. The other possibilities are only use one amp and wire the VC's in series, or find two one ohm stable amps.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Sub & Amp compatibility

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.