subs, midbass, amps?

Home / the12volt's Install Bay / Car Audio / subs, midbass, amps? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jonathangauci

Copper - Posts: 61

Joined: August 12, 2004

Location: Malta

Posted: December 13, 2006 at 7:58 AM / IP Logged

what do you think is better for spl dd or kicker

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 13, 2006 at 8:09 AM / IP Logged

The DD 9512's are very nice IF you have 10,000 plus watts to put to them.

The kickers are loud on much less power, but will hold up to insane amounts for competition use

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

jonathangauci

Copper - Posts: 61

Joined: August 12, 2004

Location: Malta

Posted: December 13, 2006 at 8:23 AM / IP Logged

kickers subs is more good for bass if you drive them whit a the power you need

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 13, 2006 at 12:53 PM / IP Logged

not sure if that was a question or what that was.

But the Kicker's are better on limited power.

The DD's take to much power to use the full potential of them

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

jonathangauci

Copper - Posts: 61

Joined: August 12, 2004

Location: Malta

Posted: December 24, 2006 at 1:55 PM / IP Logged

l have only 3.25 cf space right now l have a kicker solo baric 12 l7 in 3.25 cf l find the dimentions in kicker site if l make 2 s12 l7 subs at 1.625 cf each sub it will be louder l have kicker kx 2500 and the box is ported thanks and happy chrismas and happy new year

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 24, 2006 at 2:58 PM / IP Logged

if you have limited space, then I would make it a common chamber box. both subs in the 3.25 cu ft you have availible. With that much power it is almost safer to run the box on the smaller side of specification.

With 2 subs if you can load the amplifier with a 2 ohm load then it will be louder then just one sub.

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

jonathangauci

Copper - Posts: 61

Joined: August 12, 2004

Location: Malta

Posted: December 25, 2006 at 1:37 AM / IP Logged

ok thanks man

jonathangauci

Copper - Posts: 61

Joined: August 12, 2004

Location: Malta

Posted: December 26, 2006 at 1:20 AM / IP Logged

for know l have s12l7 d4 on kx2500 at 8 ohms in a 3.25 cf ported box its very loud but midbass is poor what is better speakers please give me some opinions

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 26, 2006 at 9:18 AM / IP Logged

You want midbass from a sub...? What is the sub? I am not familiar with part #'s. Same with the amp....what's the brand?

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 26, 2006 at 9:23 AM / IP Logged

I found the amp....it's a butt kicker (no pun intended) Wire the DVC sub for 2 ohms. Make sure your charging system and battery can deliver.

Recommended Amplifier: Stable at 2 or 1 ohm mono

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.