setup, 4 subs, components

Home / the12volt's Install Bay / Car Audio / setup, 4 subs, components (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spahkz

Member - Posts: 1

Joined: November 26, 2006

Posted: January 23, 2007 at 9:10 PM / IP Logged

ok, some of you might think this is a noob question, well it is. i want to wire in 4 subs, with component speakers in the front.. i was just wondering if i should run the 4 subs off 2 amps, with a 4 gauge power kit comming from the battery into a power distributor. but my main question is, how am i suppose to hook up the components? if some one could please email me at spahkz@hotmail.com it will be greatly appreciated. and any tips will be welcomed.

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 23, 2007 at 9:50 PM / IP Logged

Answers are best made in this forum. That way, all readers can benefit.

Post again with make and model number of your subs. It is only then that someone can help you determine power requirements. As for hooking up the components, what didn't you understand in the owner's manual that came with them? I know sometimes those manuals can be hard to understand. There again, make and model number.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: January 23, 2007 at 10:32 PM / IP Logged

you wont be able to use the same amp for both subwoofers and components

Back to Top

throwback2332

Member - Posts: 41

Joined: May 18, 2005

Posted: January 25, 2007 at 1:48 AM / IP Logged

Give details, amps ratings and channels/mono? Speaker size, RMS rating, 3 subs will be more amp friendly than 4.

If it's not custom, then it's not you.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

setup, 4 subs, components

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.